* disable pure runner logging
there's a racey bug where the logger is being written to when it's closing,
but this led to figuring out that we don't need the logger at all in pure
runner really, the syslog thing isn't an in process fn thing and we don't need
the logs from attach for anything further in pure runner. so this disables the
logger at the docker level, to save sending the bytes back over the wire, this
could be a nice little performance bump too. of course, with this, it means
agents can be configured to not log debug or have logs to store at all, and
not a lot of guards have been put on this for 'full' agent mode while it hangs
on a cross feeling the breeze awaiting its demise - the default configuration
remains the same, and no behavior changes in 'full' agent are here.
it was a lot smoother to make the noop than to try to plumb in 'nil' for
stdout/stderr, this has a lot lower risk of nil panic issues for the same
effect, though it's not perfect relying on type casting, plumbing in an
interface to check has the same issues (loss of interface adherence for any
decorator), so this seems ok. defaulting to not having a logger was similarly
painful, and ended up with this. but open to ideas.
* replace usage of old null reader writer impl
* make Read return io.EOF for io.Copy usage
This implements a "detached" mechanism to get an ack from the runner
once it actually starts to run a function. In this scenario the response
returned back is just a 202 if we placed the function in a specific
time-frame. If we hit some errors or we fail to place the fn in time we
return back different errors.
* get rid of old format stuff, utils usage, fix up for fdk2.0 interface
* pure agent format removal, TODO remove format field, fix up all tests
* shitter's clogged
* fix agent tests
* start rolling through server tests
* tests compile, some failures
* remove json / content type detection on invoke/httptrigger, fix up tests
* remove hello, fixup system tests
the fucking status checker test just hangs and it's testing that it doesn't
work so the test passes but the test doesn't pass fuck life it's not worth it
* fix migration
* meh
* make dbhelper shut up about dbhelpers not being used
* move fail status at least into main thread, jfc
* fix status call to have FN_LISTENER
also turns off the stdout/stderr blocking between calls, because it's
impossible to debug without that (without syslog), now that stdout and stderr
go to the same place (either to host stderr or nowhere) and isn't used for
function output this shouldn't be a big fuss really
* remove stdin
* cleanup/remind: fixed bug where watcher would leak if container dies first
* silence system-test logs until fail, fix datastore tests
postgres does weird things with constraints when renaming tables, took the
easy way out
system-tests were loud as fuck and made you download a circleci text file of
the logs, made them only yell when they goof
* fix fdk-go dep for test image. fun
* fix swagger and remove test about format
* update all the gopkg files
* add back FN_FORMAT for fdks that assert things. pfft
* add useful error for functions that exit
this error is really confounding because containers can exit for all manner of
reason, we're just guessing that this is the most likely cause for now, and
this error message should very likely change or be removed from the client
path anyway (context.Canceled wasn't all that useful either, but anyway, I'd
been hunting for this... so found it). added a test to avoid being publicly
shamed for 1 line commits (beware...).
This simplifies resource tracker. Originally, logically we had
split the cpu/mem into two pools where a 20%
was kept specifically for sync calls to avoid
async calls dominating the system. However, resource
tracker should not handle such call prioritization.
Given the improvements to the evictor, I think
we can get rid of this code in resource tracker
for time being.
* Inital Refactor
Removing the repeated logic exposed some problems with the reponse
writers.
Currently, the trigger writer was overlaid on part of the header
writing. The main invoke blog writing into the different levels of the
overlays at different points in the logic.
Instead, by extending the types and embedded structs, the writer is
more transparent. So, at the end of the flow it goes over all the
headers available and removes our prefixes. This lets the invoke logic
just write to the top level.
Going to continue after lunch to try and remove some of the layers and
param passing.
* Try and repeat concurrency failure
* Nested FromHTTPFnRequest inside FromHTTPTriggerRequest
* Consolidate buffer pooling logic
* go fmt yourself
* fix import
* adds parity level of testing http-stream invoke
the other formats had a gamut of tests, now http-stream does too. this makes
obvious some of its behaviors. some things changed / can change now that we
don't have pipes to worry about, the main one being that when containers blow
up now the uds client will get an EOF/ECONNREFUSED instead of the pipe getting
wedged up (allowing us to get the container error easily, previously). I made
my best 50% effort to make a reasonable error for when this happens (similar
to when http/json received garbage errors), open to ideas on verbiage / policy
there.
should be pretty straightforward. one thing to notice is that
http/json/default don't return our fancy new Fn-Http-Status or Fn-Http-H
headers... it's relatively easy to go add this to fdk-go just to test this,
but for invoke I'm really not sure we care (?) and for the gateway, the output
will be identical with the old formats bypassing the header decap. if anybody
has any feelings, feel free to express them.
* fix oomer up for new error
* Adding http header stripping to agent
Adding the header stripping into the agent, this should be low enough
that all routes to fns get treated the same.
* initial invoke testing
this assures that Content-Type and Fn-Http-Status are set for an http-stream
function. it took some fixing up of the test utils code for the plumbing to
work, looking forward to deleting most stuff in fn-test-utils.go file around
each format -- had to update fdk-go to latest for http-stream support. this
only adds 1 test, since there's some machinery here, and would like to unblock
working on the http gateway simultaneously while adding a full suite of invoke
tests (this work can be parallelized)...
i added debug logs back to the debugging output. turns out this is useful, but
it can get noisy (only when things fail, hopefully).
* fix oom tests?
* clean up hardcoded lsnr.sock refs
because what drivers.ContainerTask needs is another method, and we all know it
atoning for my sins the first time around. and yes, i refuse to use a cross
package exported constant (just think of the dep graphs)
* fix tests
Largely a removal job, however many tests, particularly system level
ones relied on Routes. These have been migrated to use Fns.
* Add 410 response to swagger
* No app names in log tags
* Adding constraint in GetCall for FnID
* Adding test to check FnID is required on call
* Add fn_id to call selector
* Fix text in docker mem warning
* Correct buildConfig func name
* Test fix up
* Removing CPU setting from Agent test
CPU setting has been deprecated, but the code base is still riddled
with it. This just removes it from this layer. Really we need to
remove it from Call.
* Remove fn id check on calls
* Reintroduce fn id required on call
* Adding fnID to calls for execute test
* Correct setting of app id in middleware
* Removes root middlewares ability to redirect fun invocations
* Add over sized test check
* Removing call fn id check
1) Early call validation and return due to cpu/mem impossible
to meet (eg. request cpu/mem larger than max-mem or max-cpu
on server) now emits HTTP Bad Request (400) instead of 503.
This case is most likely due to client/service configuration
and/or validation issue.
2) 'failed' metric is now removed. 'failed' versus 'errors'
were too confusing. 'errors' is now a catch all error case.
3) new 'canceled' counter for client side cancels.
4) 'server_busy' now covers more cases than it previously did.
* POC code for inotify UDS-io-socket
* http-stream format
introducing the `http-stream` format support in fn. there are many details for
this, none of which can be linked from github :( -- docs are coming (I could
even try to add some here?). this is kinda MVP-ish level, but does not
implement the remaining spec, ie 'headers' fixing up / invoke fixing up. the
thinking being we can land this to test fdks / cli with and start splitting
work up on top of this. all other formats work the same as previous (no
breakage, only new stuff)
with the cli you can set `format: http-stream` and deploy, and then invoke a
function via the `http-stream` format. this uses unix domain socket (uds) on
the container instead of previous stdin/stdout, and fdks will have to support
this in a new fashion (will see about getting docs on here). fdk-go works,
which is here: https://github.com/fnproject/fdk-go/pull/30 . the output looks
the same as an http format function when invoking a function. wahoo.
there's some amount of stuff we can clean up here, enumerated:
* the cleanup of the sock files is iffy, high pri here
* permissions are a pain in the ass and i punted on dealing with them. you can
run `sudo ./fnserver` if running locally, it may/may not work in dind(?) ootb
* no pipe usage at all (yay), still could reduce buffer usage around the pipe
behavior, we could clean this up potentially before removal (and tests)
* my brain can’t figure out if dispatchOldFormats changes pipe behavior, but
tests work
* i marked XXX to do some clean up which will follow soon… need this to test fdk
tho so meh, any thoughts on those marked would be appreciated however (1 less
decision for me). mostly happy w/ general shape/plumbing tho
* there are no tests atm, this is a tricky dance indeed. attempts were made.
need to futz with the permission stuff before committing to adding any tests
here, which I don't like either. also, need to get the fdk-go based test image
updated according to the fdk-go, and there's a dance there too. rumba time..
* delaying the big big cleanup until we have good enough fdk support to kill
all the other formats.
open to ideas on how to maneuver landing stuff...
* fix unmount
* see if the tests work on ci...
* add call id header
* fix up makefile
* add configurable iofs opts
* add format file describing http-stream contract
* rm some cruft
* default iofs to /tmp, remove mounting
out of the box fn we can't mount. /tmp will provide a memory backed fs for us
on most systems, this will be fine for local developing and this can be
configured to be wherever for anyone that wants to make things more difficult
for themselves.
also removes the mounting, this has to be done as root. we can't do this in
the oss fn (short of requesting root, but no). in the future, we may want to
have a knob here to have a function that can be configured in fn that allows
further configuration here. since we don't know what we need in this dept
really, not doing that yet (it may be the case that it could be done
operationally outside of fn, eg, but not if each directory needs to be
configured itself, which seems likely, anyway...)
* add WIP note just in case...
moves the config option for max request size up to the front end, adds the env
var for it there, adds a server test for it and removes it from agent. a
request is either gonna come through the lb (before grpc) or to the server, we
can handle limiting the request there at least now, which may be easier than
having multiple layers of request body checking. this aligns with not making
the agent as responsible for http behaviors (eventually, not at all once route
is fully deprecated).
* Initial suypport for invoking tiggers
* dupe method
* tighten server constraints
* runner tests not working yet
* basic route tests passing
* post rebase fixes
* add hybrid support for trigger invoke and tests
* consoloidate all hybrid evil into one place
* cleanup and make triggers unique by source
* fix oops with Agent
* linting
* review fixes
* add DateTime sans mgo
* change all uses of strfmt.DateTime to common.DateTime, remove test strfmt usage
* remove api tests, system-test dep on api test
multiple reasons to remove the api tests:
* awkward dependency with fn_go meant generating bindings on a branched fn to
vendor those to test new stuff. this is at a minimum not at all intuitive,
worth it, nor a fun way to spend the finite amount of time we have to live.
* api tests only tested a subset of functionality that the server/ api tests
already test, and we risk having tests where one tests some thing and the
other doesn't. let's not. we have too many test suites as it is, and these
pretty much only test that we updated the fn_go bindings, which is actually a
hassle as noted above and the cli will pretty quickly figure out anyway.
* fn_go relies on openapi, which relies on mgo, which is deprecated and we'd
like to remove as a dependency. openapi is a _huge_ dep built in a NIH
fashion, that cannot simply remove the mgo dep as users may be using it.
we've now stolen their date time and otherwise killed usage of it in fn core,
for fn_go it still exists but that's less of a problem.
* update deps
removals:
* easyjson
* mgo
* go-openapi
* mapstructure
* fn_go
* purell
* go-validator
also, had to lock docker. we shouldn't use docker on master anyway, they
strongly advise against that. had no luck with latest version rev, so i locked
it to what we were using before. until next time.
the rest is just playing dep roulette, those end up removing a ton tho
* fix exec test to work
* account for john le cache
In pure-runner and LB agent, service providers might want to set specific driver options.
For example, to add cpu-shares to functions, LB can add the information as extensions
to the Call and pass this via gRPC to runners. Runners then pick these extensions from
gRPC call and pass it to driver. Using a custom driver implementation, pure-runners can
process these extensions to modify docker.CreateContainerOptions.
To achieve this, LB agents can now be configured using a call overrider.
Pure-runners can be configured using a custom docker driver.
RunnerCall and Call interfaces both expose call extensions.
An example to demonstrate this is implemented in test/fn-system-tests/system_test.go
which registers a call overrider for LB agent as well as a simple custom docker driver.
In this example, LB agent adds a key-value to extensions and runners add this key-value
as an environment variable to the container.
* fn: user friendly timeout handling changes
Timeout setting in routes now means "maximum amount
of time a function can run in a container".
Total wait time for a given http request is now expected
to be handled by the client. As long as the client waits,
the LB, runner or agents will search for resources to
schedule it.
* fn: lb & pure-runner slot hash id communication
With this change, LB can pre-calculate the slot hash
key and pass it to runners. If LB knows/calculates
the slot hash ids, then it can also make better
estimates on which runner can successfully execute
it especially when status messages from runner
include a small summary of idle slots for a given
slot hash id. (TODO)
* fn: fix mock test
* fn: size restricted tmpfs /tmp and read-only / support
*) read-only Root Fs Support
*) removed CPUShares from docker API. This was unused.
*) docker.Prepare() refactoring
*) added docker.configureTmpFs() for size limited tmpfs on /tmp
*) tmpfs size support in routes and resource tracker
*) fix fn-test-utils to handle sparse files better in create file
* test typo fix
* fn: lb and pure-runner with non-blocking agent
*) Removed pure-runner capacity tracking code. This did
not play well with internal agent resource tracker.
*) In LB and runner gRPC comm, removed ACK. Now,
upon TryCall, pure-runner quickly proceeds to call
Submit. This is good since at this stage pure-runner
already has all relevant data to initiate the call.
*) Unless pure-runner emits a NACK, LB immediately
streams http body to runners.
*) For retriable requests added a CachedReader for
http.Request Body.
*) Idempotenty/retry is similar to previous code.
After initial success in Engament, after attempting
a TryCall, unless we receive NACK, we cannot retry
that call.
*) ch and naive places now wraps each TryExec with
a cancellable context to clean up gRPC contexts
quicker.
* fn: err for simpler one-time read GetBody approach
This allows for a more flexible approach since we let
users to define GetBody() to allow repetitive http body
read. In default LB case, LB executes a one-time io.ReadAll
and sets of GetBody, which is detected by RunnerCall.RequestBody().
* fn: additional check for non-nil req.body
* fn: attempt to override IO errors with ctx for TryExec
* fn: system-tests log dest
* fn: LB: EOF send handling
* fn: logging for partial IO
* fn: use buffer pool for IO storage in lb agent
* fn: pure runner should use chunks for data msgs
* fn: required config validations and pass APIErrors
* fn: additional tests and gRPC proto simplification
*) remove ACK/NACK messages as Finish message type works
OK for this purpose.
*) return resp in api tests for check for status code
*) empty body json test in api tests for lb & pure-runner
* fn: buffer adjustments
*) setRequestBody result handling correction
*) switch to bytes.Reader for read-only safety
*) io.EOF can be returned for non-nil Body in request.
* fn: clarify detection of 503 / Server Too Busy
* fn: agent MaxRequestSize limit
Currently, LimitRequestBody() exists to install a
http request body size in http/gin server. For production
enviroments, this is expected to be used. However, in agents
we may need to verify/enforce these size limits and to be
able to assert in case of missing limits is valuable.
With this change, operators can define an agent env variable
to limit this in addition to installing Gin/Http handler.
http.MaxBytesReader is superior in some cases as it sets
http headers (Connection: close) to guard against subsequent
requests.
However, NewClampReadCloser() is superior in other cases,
where it can cleanly return an API error for this case alone
(http.MaxBytesReader() does not return a clean error type
for overflow case, which makes it difficult to use it without
peeking into its implementation.)
For lb agent, upcoming changes rely on such limits enabled
and using gin/http handler (http.MaxBytesReader) makes such
checks/safety validations difficult.
* fn: read/write clamp code adjustment
In case of overflows, opt for simple implementation
of a partial write followed by return error.
* add user syslog writers to app
users may specify a syslog url[s] on apps now and all functions under that app
will spew their logs out to it. the docs have more information around details
there, please review those (swagger and operating/logging.md), tried to
implement to spec in some parts and improve others, open to feedback on
format though, lots of liberty there.
design decision wise, I am looking to the future and ignoring cold containers.
the overhead of the connections there will not be worth it, so this feature
only works for hot functions, since we're killing cold anyway (even if a user
can just straight up exit a hot container).
syslog connections will be opened against a container when it starts up, and
then the call id that is logged gets swapped out for each call that goes
through the container, this cuts down on the cost of opening/closing
connections significantly. there are buffers to accumulate logs until we get a
`\n` to actually write a syslog line, and a buffer to save some bytes when
we're writing the syslog formatting as well. underneath writers re-use the
line writer in certain scenarios (swapper). we could likely improve the ease
of setting this up, but opening the syslog conns against a container seems
worth it, and is a different path than the other func loggers that we create
when we make a call object. the Close() stuff is a little tricky, not sure how
to make it easier and have the ^ benefits, open to idears.
this does add another vector of 'limits' to consider for more strict service
operators. one being how many syslog urls can a user add to an app (infinite,
atm) and the other being on the order of number of containers per host we
could run out of connections in certain scenarios. there may be some utility
in having multiple syslog sinks to send to, it could help with debugging at
times to send to another destination or if a user is a client w/ someone and
both want the function logs, e.g. (have used this for that in the past,
specifically).
this also doesn't work behind a proxy, which is something i'm open to fixing,
but afaict will require a 3rd party dependency (we can pretty much steal what
docker does). this is mostly of utility for those of us that work behind a
proxy all the time, not really for end users.
there are some unit tests. integration tests for this don't sound very fun to
maintain. I did test against papertrail with each protocol and it works (and
even times out if you're behind a proxy!).
closes#337
* add trace to syslog dial
* CloudEvents I/O format support.
* Updated format doc.
* Remove log lines
* This adds support for CloudEvent ingestion at the http router layer.
* Updated per comments.
* Responds with full CloudEvent message.
* Fixed up per comments
* Fix tests
* Checks for cloudevent content-type
* doesn't error on missing content-type.
* fn: reduce lbagent and agent dependency
lbagent and agent code is too dependent. This causes
any changed in agent to break lbagent. In reality, for
LB there should be no delegated agent. Splitting these
two will cause some code duplication, but it reduces
dependency and complexity (eg. agent without docker)
* fn: post rebase fixup
* fn: runner/runnercall should use lbDeadline
* fn: fixup ln agent test
* fn: remove agent create option for common.WaitGroup
* GRPC streams end with an EOF
The client should ensure that the final packet is followed by a GRPC
EOF. This has the benefit of permitting the client code to clean up resources.
* Don't require an entire HTTP request in RunnerCall
TryExec needs a handle on an incoming ReadCloser containing the body
of a request; however, everything else will already have been extracted
from the HTTP request in the case of lbAgent use.
(The point of this change is to simplify the interface for other uses.)
* Return error from GRPC layer explicitly
As per review
* App ID
* Clean-up
* Use ID or name to reference apps
* Can use app by name or ID
* Get rid of AppName for routes API and model
routes API is completely backwards-compatible
routes API accepts both app ID and name
* Get rid of AppName from calls API and model
* Fixing tests
* Get rid of AppName from logs API and model
* Restrict API to work with app names only
* Addressing review comments
* Fix for hybrid mode
* Fix rebase problems
* Addressing review comments
* Addressing review comments pt.2
* Fixing test issue
* Addressing review comments pt.3
* Updated docstring
* Adjust UpdateApp SQL implementation to work with app IDs instead of names
* Fixing tests
* fmt after rebase
* Make tests green again!
* Use GetAppByID wherever it is necessary
- adding new v2 endpoints to keep hybrid api/runner mode working
- extract CallBase from Call object to expose that to a user
(it doesn't include any app reference, as we do for all other API objects)
* Get rid of GetAppByName
* Adjusting server router setup
* Make hybrid work again
* Fix datastore tests
* Fixing tests
* Do not ignore app_id
* Resolve issues after rebase
* Updating test to make it work as it was
* Tabula rasa for migrations
* Adding calls API test
- we need to ensure we give "App not found" for the missing app and missing call in first place
- making previous test work (request missing call for the existing app)
* Make datastore tests work fine with correctly applied migrations
* Make CallFunction middleware work again
had to adjust its implementation to set app ID before proceeding
* The biggest rebase ever made
* Fix 8's migration
* Fix tests
* Fix hybrid client
* Fix tests problem
* Increment app ID migration version
* Fixing TestAppUpdate
* Fix rebase issues
* Addressing review comments
* Renew vendor
* Updated swagger doc per recommendations
* Move out node-pool manager and replace it with RunnerPool extension
* adds extension points for runner pools in load-balanced mode
* adds error to return values in RunnerPool and Runner interfaces
* Implements runner pool contract with context-aware shutdown
* fixes issue with range
* fixes tests to use runner abstraction
* adds empty test file as a workaround for build requiring go source files in top-level package
* removes flappy timeout test
* update docs to reflect runner pool setup
* refactors system tests to use runner abstraction
* removes poolmanager
* moves runner interfaces from models to api/runnerpool package
* Adds a second runner to pool docs example
* explicitly check for request spillover to second runner in test
* moves runner pool package name for system tests
* renames runner pool pointer variable for consistency
* pass model json to runner
* automatically cast to http.ResponseWriter in load-balanced call case
* allow overriding of server RunnerPool via a programmatic ServerOption
* fixes return type of ResponseWriter in test
* move Placer interface to runnerpool package
* moves hash-based placer out of open source project
* removes siphash from Gopkg.lock
* fn: enable failing test back
* fn: fortifying the stderr output
Modified limitWriter to discard excess data instead
of returning error, this is to allow stderr/stdout
pipes flowing to avoid head-of-line blocking or
data corruption in container stdout/stderr output stream.
* Initial stab at the protocol
* initial protocol sketch for node pool manager
* Added http header frame as a message
* Force the use of WithAgent variants when creating a server
* adds grpc models for node pool manager plus go deps
* Naming things is really hard
* Merge (and optionally purge) details received by the NPM
* WIP: starting to add the runner-side functionality of the new data plane
* WIP: Basic startup of grpc server for pure runner. Needs proper certs.
* Go fmt
* Initial agent for LB nodes.
* Agent implementation for LB nodes.
* Pass keys and certs to LB node agent.
* Remove accidentally left reference to env var.
* Add env variables for certificate files
* stub out the capacity and group membership server channels
* implement server-side runner manager service
* removes unused variable
* fixes build error
* splits up GetCall and GetLBGroupId
* Change LB node agent to use TLS connection.
* Encode call model as JSON to send to runner node.
* Use hybrid client in LB node agent.
This should provide access to get app and route information for the call
from an API node.
* More error handling on the pure runner side
* Tentative fix for GetCall problem: set deadlines correctly when reserving slot
* Connect loop for LB agent to runner nodes.
* Extract runner connection function in LB agent.
* drops committed capacity counts
* Bugfix - end state tracker only in submit
* Do logs properly
* adds first pass of tracking capacity metrics in agent
* maked memory capacity metric uint64
* maked memory capacity metric uint64
* removes use of old capacity field
* adds remove capacity call
* merges overwritten reconnect logic
* First pass of a NPM
Provide a service that talks to a (simulated) CP.
- Receive incoming capacity assertions from LBs for LBGs
- expire LB requests after a short period
- ask the CP to add runners to a LBG
- note runner set changes and readvertise
- scale down by marking runners as "draining"
- shut off draining runners after some cool-down period
* add capacity update on schedule
* Send periodic capcacity metrics
Sending capcacity metrics to node pool manager
* splits grpc and api interfaces for capacity manager
* failure to advertise capacity shouldn't panic
* Add some instructions for starting DP/CP parts.
* Create the poolmanager server with TLS
* Use logrus
* Get npm compiling with cert fixups.
* Fix: pure runner should not start async processing
* brings runner, nulb and npm together
* Add field to acknowledgment to record slot allocation latency; fix a bug too
* iterating on pool manager locking issue
* raises timeout of placement retry loop
* Fix up NPM
Improve logging
Ensure that channels etc. are actually initialised in the structure
creation!
* Update the docs - runners GRPC port is 9120
* Bugfix: return runner pool accurately.
* Double locking
* Note purges as LBs stop talking to us
* Get the purging of old LBs working.
* Tweak: on restart, load runner set before making scaling decisions.
* more agent synchronization improvements
* Deal with teh CP pulling out active hosts from under us.
* lock at lbgroup level
* Send request and receive response from runner.
* Add capacity check right before slot reservation
* Pass the full Call into the receive loop.
* Wait for the data from the runner before finishing
* force runner list refresh every time
* Don't init db and mq for pure runners
* adds shutdown of npm
* fixes broken log line
* Extract an interface for the Predictor used by the NPM
* purge drained connections from npm
* Refactor of the LB agent into the agent package
* removes capacitytest wip
* Fix undefined err issue
* updating README for poolmanager set up
* ues retrying dial for lb to npm connections
* Rename lb_calls to lb_agent now that all functionality is there
* Use the right deadline and errors in LBAgent
* Make stream error flag per-call rather than global otherwise the whole runner is damaged by one call dropping
* abstracting gRPCNodePool
* Make stream error flag per-call rather than global otherwise the whole runner is damaged by one call dropping
* Add some init checks for LB and pure runner nodes
* adding some useful debug
* Fix default db and mq for lb node
* removes unreachable code, fixes typo
* Use datastore as logstore in API nodes.
This fixes a bug caused by trying to insert logs into a nil logstore. It
was nil because it wasn't being set for API nodes.
* creates placement abstraction and moves capacity APIs to NodePool
* removed TODO, added logging
* Dial reconnections for LB <-> runners
LB grpc connections to runners are established using a backoff stategy
in event of reconnections, this allows to let the LB up even in case one
of the runners go away and reconnect to it as soon as it is back.
* Add a status call to the Runner protocol
Stub at the moment. To be used for things like draindown, health checks.
* Remove comment.
* makes assign/release capacity lockless
* Fix hanging issue in lb agent when connections drop
* Add the CH hash from fnlb
Select this with FN_PLACER=ch when launching the LB.
* small improvement for locking on reloadLBGmembership
* Stabilise the list of Runenrs returned by NodePool
The NodePoolManager makes some attempt to keep the list of runner nodes advertised as
stable as possible. Let's preserve this effort in the client side. The main point of this
is to attempt to keep the same runner at the same inxed in the []Runner returned by
NodePool.Runners(lbgid); the ch algorithm likes it when this is the case.
* Factor out a generator function for the Runners so that mocks can be injected
* temporarily allow lbgroup to be specified in HTTP header, while we sort out changes to the model
* fixes bug with nil runners
* Initial work for mocking things in tests
* fix for anonymouse go routine error
* fixing lb_test to compile
* Refactor: internal objects for gRPCNodePool are now injectable, with defaults for the real world case
* Make GRPC port configurable, fix weird handling of web port too
* unit test reload Members
* check on runner creation failure
* adding nullRunner in case of failure during runner creation
* Refactored capacity advertisements/aggregations. Made grpc advertisement post asynchronous and non-blocking.
* make capacityEntry private
* Change the runner gRPC bind address.
This uses the existing `whoAmI` function, so that the gRPC server works
when the runner is running on a different host.
* Add support for multiple fixed runners to pool mgr
* Added harness for dataplane system tests, minor refactors
* Add Dockerfiles for components, along with docs.
* Doc fix: second runner needs a different name.
* Let us have three runners in system tests, why not
* The first system test running a function in API/LB/PureRunner mode
* Add unit test for Advertiser logic
* Fix issue with Pure Runner not sending the last data frame
* use config in models.Call as a temporary mechanism to override lb group ID
* make gofmt happy
* Updates documentation for how to configure lb groups for an app/route
* small refactor unit test
* Factor NodePool into its own package
* Lots of fixes to Pure Runner - concurrency woes with errors and cancellations
* New dataplane with static runnerpool (#813)
Added static node pool as default implementation
* moved nullRunner to grpc package
* remove duplication in README
* fix go vet issues
* Fix server initialisation in api tests
* Tiny logging changes in pool manager.
Using `WithError` instead of `Errorf` when appropriate.
* Change some log levels in the pure runner
* fixing readme
* moves multitenant compute documentation
* adds introduction to multitenant readme
* Proper triggering of system tests in makefile
* Fix insructions about starting up the components
* Change db file for system tests to avoid contention in parallel tests
* fixes revisions from merge
* Fix merge issue with handling of reserved slot
* renaming nulb to lb in the doc and images folder
* better TryExec sleep logic clean shutdown
In this change we implement a better way to deal with the sleep inside
the for loop during the attempt for placing a call.
Plus we added a clean way to shutdown the connections with external
component when we shut down the server.
* System_test mysql port
set mysql port for system test to a different value to the one set for
the api tests to avoid conflicts as they can run in parallel.
* change the container name for system-test
* removes flaky test TestRouteRunnerExecution pending resolution by issue #796
* amend remove_containers to remove new added containers
* Rework capacity reservation logic at a higher level for now
* LB agent implements Submit rather than delegating.
* Fix go vet linting errors
* Changed a couple of error levels
* Fix formatting
* removes commmented out test
* adds snappy to vendor directory
* updates Gopkg and vendor directories, removing snappy and addhing siphash
* wait for db containers to come up before starting the tests
* make system tests start API node on 8085 to avoid port conflict with api_tests
* avoid port conflicts with api_test.sh which are run in parallel
* fixes postgres port conflict and issue with removal of old containers
* Remove spurious println
* update vendor directory, add go.opencensus.io
* update imports
* oops
* s/opentracing/opencensus/ & remove prometheus / zipkin stuff & remove old stats
* the dep train rides again
* fix gin build
* deps from last guy
* start in on the agent metrics
* she builds
* remove tags for now, cardinality error is fussing. subscribe instead of register
* update to patched version of opencensus to proceed for now TODO switch to a release
* meh
fix imports
* println debug the bad boys
* lace it with the tags
* update deps again
* fix all inconsistent cardinality errors
* add our own logger
* fix init
* fix oom measure
* remove bugged removal code
* fix s3 measures
* fix prom handler nil
* Improve deadline handling in streaming protocols
* Move special headers handling down to the protocols
* Adding function format documentation for JSON changes
* Add tests for request url and method in JSON protocol
* Fix protocol missing fn-specific info
* Fix import
* Add panic for something that should never happen
* add spans to async
* clean up / add spans to agent
* there were a few methods which had multiple contexts which existed in the same
scope (this doesn't end well, usually), flattened those out.
* loop bound context cancels now rely on defer (also was brittle)
* runHot had a lot of ctx shuffling, flattened that.
* added some additional spans in certain paths for added granularity
* linked up the hot launcher / run hot / wait hot to _a_ root span, the first
2 are follows from spans, but at least we can see the source of these and also
can see containers launched over a hot launcher's lifetime
I left TODO around the FollowsFrom because OpenCensus doesn't, at least at the
moment, appear to have any idea of FollowsFrom and it was an extra OpenTracing
method (we have to get the span out, start a new span with the option, then
add it to the context... some shuffling required). anyway, was on the fence
about adding at least.
* resource waiters need to manage their own goroutine lifecycle
* if we get an impossible memory request, bail instead of infinite loop
* handle timeout slippery case
* still sucks, but hotLauncher doesn't leak anything. even the time.After timer goroutines
* simplify GetResourceToken
GetCall can guard against the impossible to allocate resource tasks entering
the system by erroring instead of doling them out. this makes GetResourceToken
logic more straightforward for callers, who now simply have the contract that
they won't ever get a token if they let tasks into the agent that can't run
(but GetCall guards this, and there's a test for it).
sorry, I was going to make this only do that, but when I went to fix up the
tests, my last patch went haywire so I fixed that too. this also at least
tries to simplify the hotLaunch loop, which will now no longer leak time.After
timers (which were long, and with signaller, they were many -- I got a stack
trace :) -- this breaks out the bottom half of the logic to check to see if we
need to launch into its own function, and handles the cleaning duties only in
the caller instead of in 2 different select statements. played with this a
bit, no doubt further cleaning could be done, but this _seems_ better.
* fix vet
* add units to exported method contract docs
* oops
possible breakages:
* `FN_HEADER` on cold are no longer `s/-/_/` -- this is so that cold functions
can rebuild the headers as they were when they came in on the request (fdks,
specifically), there's no guarantee that a reversal `s/_/-/` is the original
header on the request.
* app and route config no longer `s/-/_/` -- it seemed really weird to rewrite
the users config vars on these. should just pass them exactly as is to env.
* headers no longer contain the environment vars (previously, base config; app
config, route config, `FN_PATH`, etc.), these are still available in the
environment.
this gets rid of a lot of the code around headers, specifically the stuff that
shoved everything into headers when constructing a call to begin with. now we
just store the headers separately and add a few things, like FN_CALL_ID to
them, and build a separate 'config' now to store on the call. I thought
'config' was more aptly named, 'env' was confusing, though now 'config' is
exactly what 'base_vars' was, which is only the things being put into the env.
we weren't storing this field in the db, this doesn't break unless there are
messages in a queue from another version, anyway, don't think we're there and
don't expect any breakage for anybody with field name changes.
this makes the configuration stuff pretty straight forward, there's just two
separate buckets of things, and cold just needs to mash them together into the
env, and otherwise hot containers just need to put 'config' in the env, and then
hot format can shove 'headers' in however they'd like. this seems better than
my last idea about making this easier but worse (RIP).
this means:
* headers no longer contain all vars, the set of base vars can only be found
in the environment.
* headers is only the headers from request + call_id, deadline, method, url
* for cold, we simply add the headers to the environment, prepending
`FN_HEADER_` to them, BUT NOT upper casing or `s/-/_/`
* fixes issue where async hot functions would end up with `Fn_header_`
prefixed headers
* removes idea of 'base' vars and 'env'. this was a strange concept. now we just have
'config' which was base vars, and headers, which was base_env+headers; i.e.
they are disjoint now.
* casing for all headers will lean to be `My-Header` style, which should help
with consistency. notable exceptions for cold only are FN_CALL_ID, FN_METHOD,
and FN_REQUEST_URL -- this is simply to avoid breakage, in either hot format
they appear as `Fn_call_id` still.
* removes FN_PARAM stuff
* updated doc with behavior
weird things left:
`Fn_call_id` e.g. isn't a correctly formatted http header, it should likely be
`Fn-Call-Id` but I wanted to live to fight another day on this one, it would
add some breakage.
examples to be posted of each format below
closes#329
Since by policy we require timeout/2 remaining time
before we can execute the request, we should also
bound the slot wait time by timeout/2 to avoid
waiting for full timeout in slot wait phase.
*) Updated fn-test-utils to latest fdk-go
*) Added hot-json to runner tests
*) Removed anon function in FromRequest which had
a side effect to set req.URL.Host. This is now more
explicit and eliminates some corresponding logic in
protocol http.
*) in gin, http request RequestURI is not set, removed
code that references this. (use Call.URL instead)
