* add error to call model
closes#331
previously, for async this error was being masked completely even if it was
something useful like the image not existing. for sync, the error was returned
in the http request but now it's also being stored. this error itself can
cover a lot of landscape, it could be an error in getting a slot, pulling an
image, running a container, among other things. anyway, no longer being
masked. we can likely improve it in certain cases we run into in the future,
but it's open ended at the moment and not being masked like some errors in
sync http request returns (503 non-models.APIError) for now.
* tucks in callTrigger stuff to keep api clean
* adds swagger
* adds migration
* adds tests for datastore and agent to ensure behavior
* pull images before tests are ran
* gofmt migrations file
* add per call stats field as histogram
this will add a histogram of up to 240 data points of call data, produced
every second, stored at the end of a call invocation in the db. the same
metrics are also still shipped to prometheus (prometheus has the
not-potentially-reduced version). for the API reference, see the updates to
the swagger spec, this is just added onto the get call endpoint.
this does not add any extra db calls and the field for stats in call is a json
blob, which is easily modified to add / omit future fields. this is just
tacked on to the call we're making to InsertCall, and expect this to add very
little overhead; we are bounding the set to be relatively small, planning to
clean out the db of calls periodically, functions will generally be short, and
the same code used at a previous firm did not cause a notable db size increase
with production workload that is worse, wrt histogram size (I checked). the
code changes are really small aside from changing to strfmt.DateTime,
adding a migration and implementing sql.Valuer; needed to slightly modify the
swap function so that we can safely read `call.Stats` field to upload at end.
with the full histogram in hand, we can compute max/min/average/median/growth
rate/bernoulli distributions/whatever very easily in a UI or tooling. in
particular, this data is easily chartable [for a UI], which is beneficial.
* adds swagger spec of api update to calls endpoint
* adds migration for call.stats field
* adds call.stats field to sql queries
* change swapping of hot logger to exec, so we know that call.Stats is no
longer being modified after `exec` [in call.End]
* throws out docker stats between function invocations in hot functions (no
call to store them on, we could change this later for debug; they're in prom)
* tested in tests and API
closes#19
* add format of ints to swag
* add minio-go dep, update deps
* add minio s3 client
minio has an s3 compatible api and is an open source project and, notably, is
not amazon, so it seems best to use their client (fwiw the aws-sdk-go is a
giant hair ball of things we don't need, too). it was pretty easy and seems
to work, so rolling with it. also, minio is a totally feasible option for fn
installs in prod / for demos / for local.
* adds 's3' package for s3 compatible log storage api, for use with storing
logs from calls and retrieving them.
* removes DELETE /v1/apps/:app/calls/:call/log endpoint
* removes internal log deletion api
* changes the GetLog API to use an io.Reader, which is a backwards step atm
due to the json api for logs, I have another branch lined up to make a plain
text log API and this will be much more efficient (also want to gzip)
* hooked up minio to the test suite and fixed up the test suite
* add how to run minio docs and point fn at it docs
some notes: notably we aren't cleaning up these logs. there is a ticket
already to make a Mr. Clean who wakes up periodically and nukes old stuff, so
am punting any api design around some kind of TTL deletion of logs. there are
a lot of options really for Mr. Clean, we can notably defer to him when apps
are deleted, too, so that app deletion is fast and then Mr. Clean will just
clean them up later (seems like a good option).
have not tested against BMC object store, which has an s3 compatible API. but
in theory it 'just works' (the reason for doing this). in any event, that's
part of the service land to figure out.
closes#481closes#473
* add log not found error to minio land
calls, apps, and routes listing were previously returning the entire data set,
which just won't scale. this adds pagination with cursoring forward to each of
these endpoints (see the [docs](docs/definitions.md)).
the patch is really mostly tests, shouldn't be that bad to pick through.
some blarble about implementation is in order:
calls are sorted by ids but allow searching within certain `created_at` ranges
(finally). this is because sorting by `created_at` isn't feasible when
combined with paging, as `created_at` is not guaranteed to be unique -- id's
are (eliding theoreticals). i.e. on a page boundary, if there are 200 calls
with the same `created_at`, providing a `cursor` of that `created_at` will
skip over the remaining N calls with that `created_at`. also using id will be
better on the index anyway (well, less of them). yay having sortable ids! I
can't discern any issues doing this, as even if 200 calls have the same
created_at, they will have different ids, and the sort should allow paginating
them just fine. ids are also url safe, so the id works as the cursor value
just fine.
apps and routes are sorted by alphabetical order. as they aren't guaranteed to
be url safe, we are base64'ing them in the front end to a url safe format and
then returning them, and then base64 decoding them when we get them. this does
mean that they can be relatively large if the path/app is long, but if we
don't want to add ids then they were going to be pretty big anyway. a bonus
that this kind of obscures them. if somebody has better idea on formatting, by
all means.
notably, we are not using the sql paging facilities, and we are baking our own
based on cursors, which ends up being much more efficient for querying longer
lists of resources. this also should be easy to implement in other non-sql dbs
and the cursoring formats we can change on the fly since we are just exposing
them as opaque strings. the front end deals with the base64 / formatting, etc
and the back end is taking raw values (strfmt.DateTime or the id for calls).
the cursor that is being passed to/by the user is simply the last resource on the
previous page, so in theory we don't even need to return it, but it does make
it a little easier to use, also, cursor being blank on the last page depends
on page full-ness, so sometimes users will get a cursor when there are no
results on next page (1/N chance, and it's not really end of world -- actually
searching for the next thing would make things more complex). there are ample
tests for this behavior.
I've turned off all query parameters allowing `LIKE` queries on certain listing
endpoints, as we should not expose sql behavior through our API in the event
that we end up not using a sql db down the road. I think we should only allow
prefix matching, which sql can support as well as other types of databases
relatively cheaply, but this is not hooked up here as it didn't 'just work'
when I was fiddling with it (can add later, they're unnecessary and weren't
wired in before in front end).
* remove route listing across apps (unused)
* fix panic when doing `/app//`. this is prob possible for other types of
endpoints, out of scope here. added a guard in front of all endpoints for this
* adds `from_time` and `to_time` query parameters to calls, so you can e.g.
list the last hour of tasks. these are not required and default to
oldest/newest.
* hooked back up the datastore tests to the sql db, only run with sqlite atm,
but these are useful, added a lot to them too.
* added a bunch of tests to the front end, so pretty sure this all works now.
* added to swagger, we'll need to re-gen. also wrote some words about
pagination workings, I'm not sure how best to link to these, feedback welcome.
* not sure how we want to manage indexes, but we may need to add some (looking
at created_at, mostly)
* `?route` changed to `?path` in routes listing, to keep consistency with
everything else
* don't 404 when searching for calls where the route doesn't exist, just
return an empty list (it's a query param ffs)
closes#141
the mqs are storing a models.Task, which was not incorporating all the fields
that are in a task.Config. I would very much like to merge these two things,
but expect to do this in a future restructuring as both are used widely and
not cordoned off properly (Config has a channel, stdin, stdout, stderr -- and
isn't just a 'config', so to speak, as Task is).
Since a task.Config is what is used to actually run a container, the result of
the aforementioned deficiency was #193 where tasks are improperly configured
and ran (namely, memory wrong).
async tasks can still not be hot, they will be reverted to default format.
would also like to fix this (also part of restructuring). I actually started
doing this, hence the changes to those files (the surface area of the change
is small and discourages improper future use, so I've left what I've done).
this will:
closes#193closes#195closes#154
removes many unused fields in models.Task, since we have not implemented
retries. priority & delay are left, even though they are not used either,
the main goal of this is to resolve#193 and both these fields are strongly
plumbed into all the mqs, so punting on those two.
this patch gets rid of max concurrency for functions altogether, as discussed,
since it will be challenging to support across functions nodes. as a result of
doing so, the previous version of functions would fall over when offered 1000
functions, so there was some work needed in order to push this through.
further work is necessary as docker basically falls over when trying to start
enough containers at the same time, and with this patch essentially every
function can scale infinitely. it seems like we could add some kind of
adaptive restrictions based on task run length and configured wait time so
that fast running functions will line up to run in a hot container instead of
them all creating new hot containers.
this patch takes a first cut at whacking out some of the insanity that was the
previous concurrency model, which was problematic in that it limited
concurrency significantly across all functions since every task went through
the same unbuffered channel, which could create blocking issues for all
functions if the channel is not picked off fast enough (it's not apparent that
this was impossible in the previous implementation). in any event, each
request has a goroutine already, there's no reason not to use it. not too hard
to wrap a map in a lock, not sure what the benefits were (added insanity?) in effect
this is marginally easier to understand and less insane (marginally). after
getting rid of max c this adds a blocking mechanism for the first invocation
of any function so that all other hot functions will wait on the first one to
finish to avoid a herd issue (was making docker die...) -- this could be
slightly improved, but works in a pinch. reduced some memory usage by having
redundant maps of htfnsvr's and task.Requests (by a factor of 2!). cleaned up
some of the protocol stuff, need to clean this up further. anyway, it's a
first cut. have another patch that rewrites all of it but was getting into
rabbit hole territory, would be happy to oblige if anybody else has problems
understanding this rat's nest of channels. there is a good bit of work left to
make this prod ready (regardless of removing max c).
a warning that this will break the db schemas, didn't put the effort in to add
migration stuff since this isn't deployed anywhere in prod...
TODO need to clean out the htfnmgr bucket with LRU
TODO need to clean up runner interface
TODO need to unify the task running paths across protocols
TODO need to move the ram checking stuff into worker for noted reasons
TODO need better elasticity of hot f(x) containers
* functions: application updates no longer accept name in the body
AppUpdate was initially conceived as an upsert endpoint for apps.
It turns out that it created an inconsistency regarding updates:
updates with names divergent with URL would not actually change
application's name.
This commit atempts to address the issue by returning an HTTP
error when trying to update an application name. In swagger.yml,
application names are already `readOnly:true`. Thus there is no
change from expected behavior.
Fixes#380
* functions: use specific error value for name change
Ensure that attempts to update route's path are properly handled
with a HTTP error. Moreover, updates swagger file to make it
explicit that routes are immutable.
Fixes#381
* functions: modify datastore to accomodate hot containers support
* functions: protocol between functions and hot containers
* functions: add hot containers clockwork
* fn: add hot containers support
* fn: make UX more consistent with regards to app name position
* fn: improve detection of missing routes
* fn: fix update operations
- No longer delete-than-add for configuration updates
- Path cleaning before most of routes operations
