Status calls should not directly use client
gRPC context deadlines/timeouts during Status
execution. Status should allow plenty of time
for the scheduler agent and docker to run and
emit useful error information.
Setting this timeout to 60 seconds, which should
surface disk I/O, docker, etc. issues.
This is useful in scenarios where gRPC client might want
to reliably observe/report the status latency metrics
and remove any possible duplicates. If the status query
was served from cache, then these latencies show last
execution latency.
* fn: runner status and docker load images
Introducing a function run for pure runner Status
calls. Previously, Status gRPC calls returned active
inflight request counts with the purpose of a simple
health checker. However this is not sufficient since
it does not show if agent or docker is healthy. With
this change, if pure runner is configured with a status
image, that image is executed through docker. The
call uses zero memory/cpu/tmpsize settings to ensure
resource tracker does not block it.
However, operators might not always have a docker
repository accessible/available for status image. Or
operators might not want the status to go over the
network. To allow such cases, and in general possibly
caching docker images, added a new environment variable
FN_DOCKER_LOAD_FILE. If this is set, fn-agent during
startup will load these images that were previously
saved with 'docker save' into docker.
* Initial suypport for invoking tiggers
* dupe method
* tighten server constraints
* runner tests not working yet
* basic route tests passing
* post rebase fixes
* add hybrid support for trigger invoke and tests
* consoloidate all hybrid evil into one place
* cleanup and make triggers unique by source
* fix oops with Agent
* linting
* review fixes
LB agent reports lb placer latency. It should also report
how long it took for the runner to initiate the call as
well as execution time inside the container if the runner
has accepted (committed) to the call.
* add DateTime sans mgo
* change all uses of strfmt.DateTime to common.DateTime, remove test strfmt usage
* remove api tests, system-test dep on api test
multiple reasons to remove the api tests:
* awkward dependency with fn_go meant generating bindings on a branched fn to
vendor those to test new stuff. this is at a minimum not at all intuitive,
worth it, nor a fun way to spend the finite amount of time we have to live.
* api tests only tested a subset of functionality that the server/ api tests
already test, and we risk having tests where one tests some thing and the
other doesn't. let's not. we have too many test suites as it is, and these
pretty much only test that we updated the fn_go bindings, which is actually a
hassle as noted above and the cli will pretty quickly figure out anyway.
* fn_go relies on openapi, which relies on mgo, which is deprecated and we'd
like to remove as a dependency. openapi is a _huge_ dep built in a NIH
fashion, that cannot simply remove the mgo dep as users may be using it.
we've now stolen their date time and otherwise killed usage of it in fn core,
for fn_go it still exists but that's less of a problem.
* update deps
removals:
* easyjson
* mgo
* go-openapi
* mapstructure
* fn_go
* purell
* go-validator
also, had to lock docker. we shouldn't use docker on master anyway, they
strongly advise against that. had no luck with latest version rev, so i locked
it to what we were using before. until next time.
the rest is just playing dep roulette, those end up removing a ton tho
* fix exec test to work
* account for john le cache
In pure-runner and LB agent, service providers might want to set specific driver options.
For example, to add cpu-shares to functions, LB can add the information as extensions
to the Call and pass this via gRPC to runners. Runners then pick these extensions from
gRPC call and pass it to driver. Using a custom driver implementation, pure-runners can
process these extensions to modify docker.CreateContainerOptions.
To achieve this, LB agents can now be configured using a call overrider.
Pure-runners can be configured using a custom docker driver.
RunnerCall and Call interfaces both expose call extensions.
An example to demonstrate this is implemented in test/fn-system-tests/system_test.go
which registers a call overrider for LB agent as well as a simple custom docker driver.
In this example, LB agent adds a key-value to extensions and runners add this key-value
as an environment variable to the container.
* Adding a way to inject a request ID
It is very useful to associate a request ID to each incoming request,
this change allows to provide a function to do that via Server Option.
The change comes with a default function which will generate a new
request ID. The request ID is put in the request context along with a
common logger which always logs the request-id
We add gRPC interceptors to the server so it can get the request ID out
of the gRPC metadata and put it in the common logger stored in the
context so as all the log lines using the common logger from the context
will have the request ID logged
* fn: user friendly timeout handling changes
Timeout setting in routes now means "maximum amount
of time a function can run in a container".
Total wait time for a given http request is now expected
to be handled by the client. As long as the client waits,
the LB, runner or agents will search for resources to
schedule it.
* fn: lb & pure-runner slot hash id communication
With this change, LB can pre-calculate the slot hash
key and pass it to runners. If LB knows/calculates
the slot hash ids, then it can also make better
estimates on which runner can successfully execute
it especially when status messages from runner
include a small summary of idle slots for a given
slot hash id. (TODO)
* fn: fix mock test
* fn: lb and pure-runner with non-blocking agent
*) Removed pure-runner capacity tracking code. This did
not play well with internal agent resource tracker.
*) In LB and runner gRPC comm, removed ACK. Now,
upon TryCall, pure-runner quickly proceeds to call
Submit. This is good since at this stage pure-runner
already has all relevant data to initiate the call.
*) Unless pure-runner emits a NACK, LB immediately
streams http body to runners.
*) For retriable requests added a CachedReader for
http.Request Body.
*) Idempotenty/retry is similar to previous code.
After initial success in Engament, after attempting
a TryCall, unless we receive NACK, we cannot retry
that call.
*) ch and naive places now wraps each TryExec with
a cancellable context to clean up gRPC contexts
quicker.
* fn: err for simpler one-time read GetBody approach
This allows for a more flexible approach since we let
users to define GetBody() to allow repetitive http body
read. In default LB case, LB executes a one-time io.ReadAll
and sets of GetBody, which is detected by RunnerCall.RequestBody().
* fn: additional check for non-nil req.body
* fn: attempt to override IO errors with ctx for TryExec
* fn: system-tests log dest
* fn: LB: EOF send handling
* fn: logging for partial IO
* fn: use buffer pool for IO storage in lb agent
* fn: pure runner should use chunks for data msgs
* fn: required config validations and pass APIErrors
* fn: additional tests and gRPC proto simplification
*) remove ACK/NACK messages as Finish message type works
OK for this purpose.
*) return resp in api tests for check for status code
*) empty body json test in api tests for lb & pure-runner
* fn: buffer adjustments
*) setRequestBody result handling correction
*) switch to bytes.Reader for read-only safety
*) io.EOF can be returned for non-nil Body in request.
* fn: clarify detection of 503 / Server Too Busy
* fn: reduce lbagent and agent dependency
lbagent and agent code is too dependent. This causes
any changed in agent to break lbagent. In reality, for
LB there should be no delegated agent. Splitting these
two will cause some code duplication, but it reduces
dependency and complexity (eg. agent without docker)
* fn: post rebase fixup
* fn: runner/runnercall should use lbDeadline
* fn: fixup ln agent test
* fn: remove agent create option for common.WaitGroup
* fn: sync.WaitGroup replacement common.WaitGroup
agent/lb_agent/pure_runner has been incorrectly using
sync.WaitGroup semantics. Switching these components to
use the new common.WaitGroup() that provides a few handy
functionality for common graceful shutdown cases.
From https://golang.org/pkg/sync/#WaitGroup,
"Note that calls with a positive delta that occur when the counter
is zero must happen before a Wait. Calls with a negative delta,
or calls with a positive delta that start when the counter is
greater than zero, may happen at any time. Typically this means
the calls to Add should execute before the statement creating
the goroutine or other event to be waited for. If a WaitGroup
is reused to wait for several independent sets of events,
new Add calls must happen after all previous Wait calls have
returned."
HandleCallEnd introduces some complexity to the shutdowns, but this
is currently handled by AddSession(2) initially and letting the
HandleCallEnd() when to decrement by -1 in addition to decrement -1 in
Submit().
lb_agent shutdown sequence and particularly timeouts with runner pool
needs another look/revision, but this is outside of the scope of this
commit.
* fn: lb-agent wg share
* fn: no need to +2 in Submit with defer.
Removed defer since handleCallEnd already has
this responsibility.
pureRunner is a not exported struct and it was set as return value for
few exported method, in this change we return Agent which is the
interface implemented by pureRunner to avoid to leak an unexprted type.
* App ID
* Clean-up
* Use ID or name to reference apps
* Can use app by name or ID
* Get rid of AppName for routes API and model
routes API is completely backwards-compatible
routes API accepts both app ID and name
* Get rid of AppName from calls API and model
* Fixing tests
* Get rid of AppName from logs API and model
* Restrict API to work with app names only
* Addressing review comments
* Fix for hybrid mode
* Fix rebase problems
* Addressing review comments
* Addressing review comments pt.2
* Fixing test issue
* Addressing review comments pt.3
* Updated docstring
* Adjust UpdateApp SQL implementation to work with app IDs instead of names
* Fixing tests
* fmt after rebase
* Make tests green again!
* Use GetAppByID wherever it is necessary
- adding new v2 endpoints to keep hybrid api/runner mode working
- extract CallBase from Call object to expose that to a user
(it doesn't include any app reference, as we do for all other API objects)
* Get rid of GetAppByName
* Adjusting server router setup
* Make hybrid work again
* Fix datastore tests
* Fixing tests
* Do not ignore app_id
* Resolve issues after rebase
* Updating test to make it work as it was
* Tabula rasa for migrations
* Adding calls API test
- we need to ensure we give "App not found" for the missing app and missing call in first place
- making previous test work (request missing call for the existing app)
* Make datastore tests work fine with correctly applied migrations
* Make CallFunction middleware work again
had to adjust its implementation to set app ID before proceeding
* The biggest rebase ever made
* Fix 8's migration
* Fix tests
* Fix hybrid client
* Fix tests problem
* Increment app ID migration version
* Fixing TestAppUpdate
* Fix rebase issues
* Addressing review comments
* Renew vendor
* Updated swagger doc per recommendations
* Move delegated agent creation within NewLBAgent so we can hide the fact we disable docker
* Move delegated agent creation within NewPureRunner for better encapsulation
* fn: reorg agent config
*) Moving constants in agent to agent config, which helps
with testing, tuning.
*) Added max total cpu & memory for testing & clamping max
mem & cpu usage if needed.
* fn: adjust PipeIO time
* fn: for hot, cannot reliably test EndOfLogs in TestRouteRunnerExecution
* Refactor PureRunner as an Agent so that it encapsulates its grpc server
* Maintain a list of extra contexts for the server to select on to handle errors and cancellations
* Initial stab at the protocol
* initial protocol sketch for node pool manager
* Added http header frame as a message
* Force the use of WithAgent variants when creating a server
* adds grpc models for node pool manager plus go deps
* Naming things is really hard
* Merge (and optionally purge) details received by the NPM
* WIP: starting to add the runner-side functionality of the new data plane
* WIP: Basic startup of grpc server for pure runner. Needs proper certs.
* Go fmt
* Initial agent for LB nodes.
* Agent implementation for LB nodes.
* Pass keys and certs to LB node agent.
* Remove accidentally left reference to env var.
* Add env variables for certificate files
* stub out the capacity and group membership server channels
* implement server-side runner manager service
* removes unused variable
* fixes build error
* splits up GetCall and GetLBGroupId
* Change LB node agent to use TLS connection.
* Encode call model as JSON to send to runner node.
* Use hybrid client in LB node agent.
This should provide access to get app and route information for the call
from an API node.
* More error handling on the pure runner side
* Tentative fix for GetCall problem: set deadlines correctly when reserving slot
* Connect loop for LB agent to runner nodes.
* Extract runner connection function in LB agent.
* drops committed capacity counts
* Bugfix - end state tracker only in submit
* Do logs properly
* adds first pass of tracking capacity metrics in agent
* maked memory capacity metric uint64
* maked memory capacity metric uint64
* removes use of old capacity field
* adds remove capacity call
* merges overwritten reconnect logic
* First pass of a NPM
Provide a service that talks to a (simulated) CP.
- Receive incoming capacity assertions from LBs for LBGs
- expire LB requests after a short period
- ask the CP to add runners to a LBG
- note runner set changes and readvertise
- scale down by marking runners as "draining"
- shut off draining runners after some cool-down period
* add capacity update on schedule
* Send periodic capcacity metrics
Sending capcacity metrics to node pool manager
* splits grpc and api interfaces for capacity manager
* failure to advertise capacity shouldn't panic
* Add some instructions for starting DP/CP parts.
* Create the poolmanager server with TLS
* Use logrus
* Get npm compiling with cert fixups.
* Fix: pure runner should not start async processing
* brings runner, nulb and npm together
* Add field to acknowledgment to record slot allocation latency; fix a bug too
* iterating on pool manager locking issue
* raises timeout of placement retry loop
* Fix up NPM
Improve logging
Ensure that channels etc. are actually initialised in the structure
creation!
* Update the docs - runners GRPC port is 9120
* Bugfix: return runner pool accurately.
* Double locking
* Note purges as LBs stop talking to us
* Get the purging of old LBs working.
* Tweak: on restart, load runner set before making scaling decisions.
* more agent synchronization improvements
* Deal with teh CP pulling out active hosts from under us.
* lock at lbgroup level
* Send request and receive response from runner.
* Add capacity check right before slot reservation
* Pass the full Call into the receive loop.
* Wait for the data from the runner before finishing
* force runner list refresh every time
* Don't init db and mq for pure runners
* adds shutdown of npm
* fixes broken log line
* Extract an interface for the Predictor used by the NPM
* purge drained connections from npm
* Refactor of the LB agent into the agent package
* removes capacitytest wip
* Fix undefined err issue
* updating README for poolmanager set up
* ues retrying dial for lb to npm connections
* Rename lb_calls to lb_agent now that all functionality is there
* Use the right deadline and errors in LBAgent
* Make stream error flag per-call rather than global otherwise the whole runner is damaged by one call dropping
* abstracting gRPCNodePool
* Make stream error flag per-call rather than global otherwise the whole runner is damaged by one call dropping
* Add some init checks for LB and pure runner nodes
* adding some useful debug
* Fix default db and mq for lb node
* removes unreachable code, fixes typo
* Use datastore as logstore in API nodes.
This fixes a bug caused by trying to insert logs into a nil logstore. It
was nil because it wasn't being set for API nodes.
* creates placement abstraction and moves capacity APIs to NodePool
* removed TODO, added logging
* Dial reconnections for LB <-> runners
LB grpc connections to runners are established using a backoff stategy
in event of reconnections, this allows to let the LB up even in case one
of the runners go away and reconnect to it as soon as it is back.
* Add a status call to the Runner protocol
Stub at the moment. To be used for things like draindown, health checks.
* Remove comment.
* makes assign/release capacity lockless
* Fix hanging issue in lb agent when connections drop
* Add the CH hash from fnlb
Select this with FN_PLACER=ch when launching the LB.
* small improvement for locking on reloadLBGmembership
* Stabilise the list of Runenrs returned by NodePool
The NodePoolManager makes some attempt to keep the list of runner nodes advertised as
stable as possible. Let's preserve this effort in the client side. The main point of this
is to attempt to keep the same runner at the same inxed in the []Runner returned by
NodePool.Runners(lbgid); the ch algorithm likes it when this is the case.
* Factor out a generator function for the Runners so that mocks can be injected
* temporarily allow lbgroup to be specified in HTTP header, while we sort out changes to the model
* fixes bug with nil runners
* Initial work for mocking things in tests
* fix for anonymouse go routine error
* fixing lb_test to compile
* Refactor: internal objects for gRPCNodePool are now injectable, with defaults for the real world case
* Make GRPC port configurable, fix weird handling of web port too
* unit test reload Members
* check on runner creation failure
* adding nullRunner in case of failure during runner creation
* Refactored capacity advertisements/aggregations. Made grpc advertisement post asynchronous and non-blocking.
* make capacityEntry private
* Change the runner gRPC bind address.
This uses the existing `whoAmI` function, so that the gRPC server works
when the runner is running on a different host.
* Add support for multiple fixed runners to pool mgr
* Added harness for dataplane system tests, minor refactors
* Add Dockerfiles for components, along with docs.
* Doc fix: second runner needs a different name.
* Let us have three runners in system tests, why not
* The first system test running a function in API/LB/PureRunner mode
* Add unit test for Advertiser logic
* Fix issue with Pure Runner not sending the last data frame
* use config in models.Call as a temporary mechanism to override lb group ID
* make gofmt happy
* Updates documentation for how to configure lb groups for an app/route
* small refactor unit test
* Factor NodePool into its own package
* Lots of fixes to Pure Runner - concurrency woes with errors and cancellations
* New dataplane with static runnerpool (#813)
Added static node pool as default implementation
* moved nullRunner to grpc package
* remove duplication in README
* fix go vet issues
* Fix server initialisation in api tests
* Tiny logging changes in pool manager.
Using `WithError` instead of `Errorf` when appropriate.
* Change some log levels in the pure runner
* fixing readme
* moves multitenant compute documentation
* adds introduction to multitenant readme
* Proper triggering of system tests in makefile
* Fix insructions about starting up the components
* Change db file for system tests to avoid contention in parallel tests
* fixes revisions from merge
* Fix merge issue with handling of reserved slot
* renaming nulb to lb in the doc and images folder
* better TryExec sleep logic clean shutdown
In this change we implement a better way to deal with the sleep inside
the for loop during the attempt for placing a call.
Plus we added a clean way to shutdown the connections with external
component when we shut down the server.
* System_test mysql port
set mysql port for system test to a different value to the one set for
the api tests to avoid conflicts as they can run in parallel.
* change the container name for system-test
* removes flaky test TestRouteRunnerExecution pending resolution by issue #796
* amend remove_containers to remove new added containers
* Rework capacity reservation logic at a higher level for now
* LB agent implements Submit rather than delegating.
* Fix go vet linting errors
* Changed a couple of error levels
* Fix formatting
* removes commmented out test
* adds snappy to vendor directory
* updates Gopkg and vendor directories, removing snappy and addhing siphash
* wait for db containers to come up before starting the tests
* make system tests start API node on 8085 to avoid port conflict with api_tests
* avoid port conflicts with api_test.sh which are run in parallel
* fixes postgres port conflict and issue with removal of old containers
* Remove spurious println
