Python ST7735 160x80

Python library to control an ST7735 TFT LCD display. Allows simple drawing on the display without installing a kernel module.

Designed specifically to work with a ST7735 based 160x80 pixel TFT SPI display. (Specifically the 0.96" SPI LCD from Pimoroni).

For all platforms (Raspberry Pi and Beaglebone Black) make sure you have the following dependencies:

sudo apt-get update
sudo apt-get install build-essential python-dev python-smbus python-pip python-imaging python-numpy

For a Raspberry Pi make sure you have the RPi.GPIO and Adafruit GPIO libraries by executing:

sudo pip install RPi.GPIO
sudo pip install Adafruit_GPIO

For a BeagleBone Black make sure you have the Adafruit_BBIO library by executing:

sudo pip install Adafruit_BBIO

Install the library by downloading with the download link on the right, unzipping the archive, navigating inside the library's directory and executing:

sudo python setup.py install

See example of usage in the examples folder.

Pimoroni invests time and resources forking and slightly modifying this open source code, please support Pimoroni and open-source software by purchasing products from us, too!

Adafruit invests time and resources providing this open source code, please support Adafruit and open-source hardware by purchasing products from Adafruit!

Modified from 'Modified from 'Adafruit Python ILI9341' written by Tony DiCola for Adafruit Industries.' written by Clement Skau.

MIT license, all text above must be included in any redistribution